Applied Sciences (Mar 2020)

Ag-Sensitized NIR-Emitting Yb<sup>3+</sup>-Doped Glass-Ceramics

  • Francesco Enrichi,
  • Elti Cattaruzza,
  • Tiziano Finotto,
  • Pietro Riello,
  • Giancarlo C. Righini,
  • Enrico Trave,
  • Alberto Vomiero

DOI
https://doi.org/10.3390/app10062184
Journal volume & issue
Vol. 10, no. 6
p. 2184

Abstract

Read online

The optical photoluminescent (PL) emission of Yb3+ ions in the near infrared (NIR) spectral region at about 950−1100 nm has many potential applications, from photovoltaics to lasers and visual devices. However, due to their simple energy-level structure, Yb3+ ions cannot directly absorb UV or visible light, putting serious limits on their use as light emitters. In this paper we describe a broadband and efficient strategy for sensitizing Yb3+ ions by Ag codoping, resulting in a strong 980 nm PL emission under UV and violet-blue light excitation. Yb-doped silica−zirconia−soda glass−ceramic films were synthesized by sol-gel and dip-coating, followed by annealing at 1000 °C. Ag was then introduced by ion-exchange in a molten salt bath for 1 h at 350 °C. Different post-exchange annealing temperatures for 1 h in air at 380 °C and 430 °C were compared to investigate the possibility of migration/aggregation of the metal ions. Studies of composition showed about 1−2 wt% Ag in the exchanged samples, not modified by annealing. Structural analysis reported the stabilization of cubic zirconia by Yb-doping. Optical measurements showed that, in particular for the highest annealing temperature of 430 °C, the potential improvement of the material’s quality, which would increase the PL emission, is less relevant than Ag-aggregation, which decreases the sensitizers number, resulting in a net reduction of the PL intensity. However, all the Ag-exchanged samples showed a broadband Yb3+ sensitization by energy transfer from Ag aggregates, clearly attested by a broad photoluminescence excitation spectra after Ag-exchange, paving the way for applications in various fields, such as solar cells and NIR-emitting devices.

Keywords