Effects of process parameters on semi-solid squeeze casting performance of aluminum alloy scrolls for scroll compressors

Abstract

The aluminum alloy scroll is one of the key parts of the scroll compressors widely used in the air-conditioning, refrigeration, and heat pump systems. In this work, the semi-solid squeeze casting (SSSC) process was used to fabricate the aluminum alloy scroll. The effects of process parameters including the pouring temperature, mold temperature, and squeezing velocity on the filling and solidification behaviors of the alloys were investigated through simulations based on the power law cut-off (PLCO) material model. Results show that there is a significant increase in the flow velocity of the slurry, and the area of the high-speed region enlarges with the increase of the pouring temperature. The homogeneity of the temperature and velocity fields in the slurry is improved with an increase in mold temperature. Both the filling time and its variation rate decrease with an increase in squeezing velocity. The maximum solidification time exhibits a linear variation with the increase in pouring temperature. The shrinkage area is decreased by increasing the mold temperature. The optimal process parameters of the SSSC process were obtained from simulation analysis, which are the pouring temperature of 595 °C, mold temperature of 350 °C, and squeezing velocity of 0.3 m·s-1. Moreover, the qualified scroll casting was fabricated using the SSSC process under the optimal process parameters.

Keywords

• semi-solid squeeze casting; aluminum alloy; scroll compressor; numerical simulation; experimental verification