Effect of Temperature Distribution on Interfacial Bonding Process between CFRTP Composite and Aluminum Alloy during Laser Direct Joining

Abstract

Laser direct joining enables non-destructive and lightweight joining of carbon fiber reinforced thermoplastic (CFRTP) composites and aluminum alloys. The interfacial bonding process determines the joint performance and is influenced by the time-varying temperature distribution. However, the interfacial bonding process occurs inside the joint, making it difficult to study the effect of temperature distribution. To resolve this issue, a novel online observation device for the interfacial bonding process between CFRTP composites and aluminum alloys is design, and the polymer melting, flowing, and bonding with metal during laser direct joining are observed. Further, temperature field simulation models for laser direct joining are established, and temperature distribution and gradient are calculated. The results show that the temperature distribution determines the melting of CFRTP composites, and bubbles generated by the thermal decomposition of the polymer hinder the melting. The temperature gradient is related to the movement of the molten matrix and fibers, and the movement towards the aluminum alloy induces cracking and delamination. Once the interface is filled with polymer, the motion changes to along the laser scanning direction and the joining defects are reduced. The study can provide a foundation for promoting interfacial bonding and reducing the defects of laser direct joining.

Keywords

• laser direct joining
• carbon fiber reinforced thermoplastic composite
• aluminum alloy
• interfacial bonding process