Signal enhancement for communication systems used by fire fighters

Abstract

Abstract So-called full-face masks are essential for fire fighters to ensure respiratory protection in smoke diving incidents. While such masks are absolutely necessary for protection purposes on one hand, they impair the voice communication of fire fighters drastically on the other hand. For this reason communication systems should be used to amplify the speech and, therefore, to improve the communication quality. This paper gives an overview of communication enhancement techniques for masks based on digital signal processing. The presented communication system picks up the speech signal by a microphone in the mask, enhance it, and play back the amplified signal by loudspeakers located on the outside of such masks. Since breathing noise is also picked up by the microphone, it’s advantageous to recognize and suppress it – especially since breathing noise is very loud (usually much louder than the recorded voice). A voice activity detection distinguishes between side talkers, pause, breathing out, breathing in, and speech. It ensures that only speech components are played back. Due to the fact that the microphone is located close to the loudspeakers, the output signals are coupling back into the microphone and feedback may occur even at moderate gains. This can be reduced by feedback reduction (consisting of cancellation and suppression approaches). To enhance the functionality of the canceler a decorrelation stage can be applied to the enhanced signal before loudspeaker playback. As a consequence of all processing stages, the communication can be improved significantly, as the results of measurements of real-time mask systems show.

Keywords

• Full-face mask communication
• Feedback cancellation
• Noise reduction