Metals (Nov 2021)

Investigation of Potential Recovery Rates of Nickel, Manganese, Cobalt, and Particularly Lithium from NMC-Type Cathode Materials (LiNi<sub>x</sub>Mn<sub>y</sub>Co<sub>z</sub>O<sub>2</sub>) by Carbo-Thermal Reduction in an Inductively Heated Carbon Bed Reactor

  • Stefan Windisch-Kern,
  • Alexandra Holzer,
  • Lukas Wiszniewski,
  • Harald Raupenstrauch

DOI
https://doi.org/10.3390/met11111844
Journal volume & issue
Vol. 11, no. 11
p. 1844

Abstract

Read online

Within the e-mobility sector, which represents a major driver of the development of the overall lithium-ion battery market, batteries with nickel-manganese-cobalt (NMC) cathode chemistries are currently gaining ground. This work is specifically dedicated to this NMC battery type and investigates achievable recovery rates of the valuable materials contained when applying an unconventional, pyrometallurgical reactor concept. For this purpose, the currently most prevalent NMC modifications (5-3-2, 6-2-2, and 8-1-1) with carbon addition were analyzed using thermogravimetric analysis and differential scanning calorimetry, and treated in a lab-scale application of the mentioned reactor principle. It was shown that the reactor concept achieves high recovery rates for nickel, cobalt, and manganese of well above 80%. For lithium, which is usually oxidized and slagged, the transfer coefficient into the slag phase was less than 10% in every experimental trial. Instead, it was possible to remove the vast amount of it via a gas phase, which could potentially open up new paths regarding metal recovery from spent lithium-ion batteries.

Keywords