Reliability Simulation of IGBT Module with Different Solders Based on the Finite Element Method

Abstract

The interconnecting solder is a key control factor for the reliability of electronic power packaging because it highly affects the junction temperature of insulated-gate bipolar transistor (IGBT) modules and is prone to plasticity, creep, and other failure behaviors under temperature-change environments. In this paper, the interconnecting performance and fatigue life of five different kinds of solders such as SAC305, sintered silver, Au80Sn20, sintered copper, and pure In under direct current (DC), power cycle, and electro-thermal coupling complex environments were studied based on electro-thermal multi-physical field coupling finite element simulation method, respectively. Results show that the sintered silver owns the most outstanding thermal reliability and the DC operating junction temperature of the IGBT module after utilizing sintered silver solder is only 90.2 °C, which is nearly 15 °C lower than that of the IGBT module utilizing SAC305 solder. Furthermore, in the power cycle reliability test, the fatigue life of Au80Sn20 solder reaches a maximum of 3.26 × 107 cycles while the life of indium presents only 5.85 × 103 cycles, a difference of nearly four orders of magnitude. Finally, under the complex environment of electro-thermal coupling, the fatigue life of Au80Sn20 solder is also the largest at 1.9 × 106 cycles, while the smallest life of solder becomes SAC305 solder at 4.44 × 102 cycles. The results of this paper can provide a theoretical basis for solder selection and life prediction of the IGBT module, which is of great significance in improving the reliability of power electronic packaging.

Keywords

• solder
• fatigue life
• reliability
• finite element