Representative Hardwood and Softwood Green Tissue-Microstructure Transitions per Age Group and Their Inherent Relationships with Physical–Mechanical Properties and Potential Applications

Abstract

A better understanding of wood form–structure–function relationships and potentialities can lead to an enormous pool of fascinating solutions and inventions. In this research advances from both the anatomical and the mechanical points of view, the principles, fundamentals and concept generators derived from the inherent relationship between green tissue-microstructure and physical–mechanical properties of two representative woody species. Specifically, a total of 120 small-clear samples cut from six (e.g., three per wood species) Eucalyptus globulus (i.e., hardwood) and Cupressus macrocarpa (i.e., softwood) trees were sampled and tested to determine the tissue transitions per age group (e.g., juvenile, mature and senile) in terms of density, area, roundness and sphericity of vessel elements, longitudinal tracheids and longitudinal/ray parenchyma cells. Moreover, the studied green tissue-microstructure transitions were compared and analysed with the corresponding physical–mechanical properties [i.e., green density, moisture content, modulus of rupture (MOR) and modulus of elasticity (MOE)] of each species, which in turn were acquired from 159 tests carried out according to the German Deutsches Institut für Normung (DIN standards). The results herein show mature and senile wood tissues are more rigid and mechanically resistant than juvenile ones, which is partially influenced by the progressive increment in cell-wall thickness as the wood-tissue ages, and this process is of greater magnitude for the eucalyptus species. Indeed, this representative hardwood species was found superior in terms of mechanical resistance to the progression of stresses due to a complex porous vascular system that becomes stronger as the tissue-microstructure ages. The design principles underlying the natural architectures of both studied green tissues provide concept generators for potential biomimetic and engineering applications, e.g., eucalyptus species are suitable for structural applications, whereas the superior flexibility found in the cypress species could be well bio-mimicked into composite panels, where the balance between strength and rigidity is of high relevance.

Keywords

• <i>Eucalyptus globulus</i> (eucalyptus)
• <i>Cupressus macrocarpa</i> (cypress)
• hardwood
• softwood
• scanning electron microscopy
• biomaterial mechanical characterisation