Study of Raw Material Pretreatment and the Microbiota Selection Effect on the Composting Process Efficiency

Abstract

Lignocellulosic is a carbon source biomass composed of cellulose, hemicelluloses, and lignin, which are strongly associated with each other. This fact makes them hardly degradable by produced microbial enzymes when introduced to compost piles. To address this problem, a primary single or combined pretreatment method of this biomass allows for the separation of these complex, interlinked fractions, allowing a better accessibility for microbial enzymes. However, the rugged lignin component, in addition to several produced by products from these pretreatments, inhibit the microbial activity. For this, the optimization of these treatments with other interfering parameters is the base for a successful composting process. In this work, nine compost piles were initiated, in which their lignocellulosic fraction was subjected to chemical and microbiological treatments alone or combined while preserving a control. The obtained results showed that the combined pre-treatment of the primary organic raw materials with 10% NaOH and adapted microbial inoculum at 2.5% was the best suited for compost piles in Mediterranean regions. This treatment ensured the quickening of the composting process by 15 days, while yielding a final compost of a higher quality in regard to its physic-chemical characteristics, especially its C:N and CC values. Furthermore, it ensured a higher sanitation through the elimination of different microbial pathogens from the final compost, by means of the secondary metabolites produced by the microbial adapted consortia. This ‘tailor-made’ process could be replicated for the treatment of other generated sources of organic raw materials within the Mediterranean region.

Keywords

• chemical pretreatment
• lignocellulosic biomass
• inoculum