Hybrid Advances (Apr 2024)

Characterization of mechanical properties, efficiency, and design considerations for the additive manufacturing of hybrid composites with continuous fibers

  • Tim Heitkamp,
  • Karl Hilbig,
  • Marijn Goutier,
  • Simon Girnth,
  • Nils Waldt,
  • Günter Klawitter,
  • Thomas Vietor

Journal volume & issue
Vol. 5
p. 100146

Abstract

Read online

The integration of continuous fibers into additively manufactured plastic components greatly enhances their mechanical properties. Nonetheless, a challenge lies in the limited adaptability of these properties to specific loading scenarios. To address this issue, present research aims to exploit the hybridization of additively manufactured composites, combining diverse fiber materials within a single component. Specifically, fabricating continuous fiber-reinforced hybrid composites through material extrusion enables high flexibility in adapting local fiber materials. To further the understanding of the effects of hybrid fiber reinforcement in additively manufactured plastic parts, this study investigates how distinct stacking sequences in hybrid and non-hybrid PA6-based composite components, reinforced with carbon and glass fibers, affect deformation and failure behavior. Mechanical properties are assessed using tensile, flexural, and impact tests, in conjunction with an analysis of cost and weight efficiency. The results unveil a distinct correlation between stacking sequences and the mechanical properties of additively manufactured composites. While the hybrid samples predominantly exhibit slight negative hybrid effects, a positive hybrid effect of 96.4 % is achieved in terms of impact toughness with an optimized stacking sequence. With the exception of impact strength, specimens reinforced solely with carbon fibers frequently demonstrate a remarkable ratio between mechanical properties, weight, and cost, whereas hybrid composites exhibit a balanced compromise across all tested mechanical properties. Building upon the obtained results, three comprehensive design approaches are introduced and applied, demonstrating the new design possibilities arising from the combination of hybrid composites and additive manufacturing. The developed design approaches and material combinations can be used for a wide range of lightweight construction applications.

Keywords