Determination of Relative Density and Degree of Saturation in Mineral Soils Based on In Situ Tests

Abstract

Based on the results of dynamic probing (DP), time-domain reflectometry (TDR/MUX/MPTS), resistivity cone penetration tests (RCPT), Marchetti dilatometer tests (DMT), and seismic dilatometer tests (SDMT), it is possible to develop a relationship to calculate the relative density (Dr) and degree of saturation (Sr) of selected sandy soils. Compiled databases from documented research points for selected sandy soils were used to construct and develop direct correlations between the measured pressures p0 and p1 from DMT and shear wave velocity (Vs) from SDMT, along with pore water pressures (u0) and atmospheric pressure (Pa). The results allowed us to make a preliminary prediction when evaluating the parameters. Further, they allowed limiting the use of an additional device, especially in the case of multilayer heavy preconsolidated subsoils. Moreover, soil physical and mechanical characteristics (temperature, humidity, pressure, swelling, salinity) measured from TDR/MUX/MPTS (laboratory/field-operated meter for simultaneous measurements of soil moisture, matric potential, temperature, and salinity—bulk electrical conductivity) were assessed. The main achievement of this paper is the original proposal of using a new nomogram chart to determine the relative density and degree of saturation based on DMT and SDMT tests.

Keywords

• geotechnical engineering
• new nomogram chart