Numerical investigation on the tensile fracturing behavior of rock-shotcrete interface based on discrete element method

Abstract

Four groups of numerical models of Brazilian tests on rock-shotcrete interfaces were successfully conducted by PFC2D. The tensile strength and Young’s modulus of shotcrete were considered. Six different undulations of rock-shotcrete interface were set up. The influences of multiple parameters on the bearing characteristics of the rock-shotcrete interface were studied. The results showed that a better support performance can be obtained by increasing the Young’s modulus of shotcrete rather than the tensile strength of shotcrete. For different tensile strength and Young’s modulus, the increase of sawtooth height has different effects on the support performance. The failure mechanism of the rock-shotcrete interfaces was analysed in detail. The stress shielding effect and stress concentration effect caused by the shape characteristics of rock-shotcrete interface were observed. The influence of these parameters on the overall support performance should be fully considered in a reasonable support design.

Keywords

• Tensile strength
• PFC
• Shotcrete
• Fracturing behavior
• Rock interface