Model testing study on engineering performances of circular helicoid piles during the whole process of installation and bearing in sandy soil

Abstract

The circular helicoid pile (CH pile) is a new type of special-shaped pile that has been developed in Japan and South Korea in the past decade and has been widely used in the fields of construction, transportation, natural energy and agriculture due to its excellent compressive and pullout bearing performances. Consequently, this new type of pile has good engineering application prospects. However, as an innovative engineering structure, the CH pile is not widely known by geotechnical engineers worldwide. The geometric structure of the CH pile is similar to a circular helicoid in differential geometry. Therefore, the pile-soil interaction problem cannot be reduced to a plane strain problem or an axisymmetric problem in theoretical research. In view of this, dry silica sand was used as the model foundation in this study, and a model test device and method that can effectively reflect the installation process and loading-bearing service state of CH piles were developed. Under different installation methods, pile structures and foundation soil conditions, 90 model tests were carried out to evaluate the engineering performances of CH piles during the whole process of installation and bearing, including the installation performances during the installation process, the compressive bearing performances under axial compressive loading and the pullout bearing performances under axial pullout loading. Compared with steel sheet piles and steel pipe piles, CH piles have better engineering performance and more economic benefits from the aspects of installation, construction, recycling, timeliness of engineering application, and the relative relationship between bearing capacity and pile mass.

Keywords

• Special-shaped pile
• Circular helicoid pile (CH pile)
• Pile installation
• Bearing performance
• Model test