Distributed Generation Islanding Effect on Distribution Networks and End User Loads Using the Load Sharing Islanding Method

Abstract

In this paper a realistic medium voltage (MV) network with four different distributed generation technologies (diesel, gas, hydro and wind) along with their excitation and governor control systems is modelled and simulated. Moreover, an exponential model was used to represent the loads in the network. The dynamic and steady state behavior of the four distributed generation technologies was investigated during grid-connected operation and two transition modes to the islanding situation, planned and unplanned. This study aims to address the feasibility of planned islanding operation and to investigate the effect of unplanned islanding. The load sharing islanding method has been used for controlling the distributed generation units during grid-connected and islanding operation. The simulation results were validated through various case studies and have shown that properly planned islanding transition could provide support to critical loads at the event of utility outages. However, a reliable protection scheme would be required to mitigate the adverse effect of unplanned islanding as all unplanned sub-cases returned severe negative results.

Keywords

• distributed generation
• islanding
• load sharing
• distribution networks
• Neplan simulation tool