Additive technologies are now widely used for the production of complex precise parts and have high potential for the production of forming dies. In this work, hot-forming dies optimized for additive manufacturing were developed and produced with wire arc direct energy deposition (WA-DED) and laser powder bed fusion (L-PBF) technologies. The concept of lightweight hot-forming dies with a 2D-lattice structure was developed, which reduced the weight of each die by 56%, from 14.2 kg to 6.1 kg, in production using L-PBF. Maraging/precipitation-hardened steel 17-4PH was used as an alternative to traditional hot-working steels with slightly lower mechanical properties and a much higher processability in the additive manufacturing process. The workability of the manufactured dies was confirmed by forging tests on an industrial screw press.
