A Method to Visualize and Quantify the Intraosseous Arteries of the Femoral Head by Vascular Corrosion Casting

Abstract

Objective To describe a method to display the three‐dimensional distribution of intraosseous arteries in the femoral head by vascular corrosion casting. Methods An experimental study was done to expose the intraosseous arteries of the femoral head by a microperfusion corrosion method between January 2021 and May 2021. Specimens were 23 swine femoral heads (12 female specimens and 11 male specimens, where age of swine ranged from 8 to 12 months, and the weight was approximately 150 kg). The femoral heads were microperfused with the vascular casting resin through retinacular arteries, and the bone of the femoral head was dissolved with 50% sodium hydroxide and 10% hydrochloric acid and rinsed under the microscope until the vessel casts were completely exposed. The distribution and anastomosis of the arteries in the femoral head were observed under direct vision and microscopy. The diameter of the artery in the femoral head was measured at 0.5 cm after its entry into the bone of the femoral head with a microscale under the microscope. The number of internal arteries with diameter ≥0.05 mm was counted. The number and diameter of the main trunk of the epiphyseal arteries in the femoral head between male and female swine were compared. Results The vascular casting specimen of the swine femoral head was successfully produced by using epoxy resin as a casting agent, and the three‐dimensional intraosseous vascular structures were clearly visible. The number of epiphyseal arteries in male and female swine was 8.55 ± 2.15 and 8.83 ± 2.15 (t = −0.31, p = 0.38), respectively. The diameters of the superior epiphyseal arteries in male and female swine were 0.35 ± 0.09 and 0.31 ± 0.08 mm (t = 1.03, p = 0.16), the diameters of the inferior epiphyseal arteries were 0.47 ± 0.05 and 0.49 ± 0.09 mm (t = −0.57, p = 0.29), and the diameters of the anterior epiphyseal arteries were 0.34 ± 0.08 and 0.33 ± 0.13 mm (t = 0.32, p = 0.37). There was no significant difference in the number and diameter of the main trunk of intraosseous arteries between male and female swine (p > 0.05). The main trunk of intraosseous arteries formed an anastomosis in the center of the femoral head. Among 23 swine femoral head samples, three types of intraosseous anastomosis were observed, including 13 (57%) posterior superior‐posterior inferior, seven (30%) posterior inferior‐anterior, and three (13%) uniform intraosseous anastomosis. Conclusion The microperfusion corrosion method can produce the vascular casting specimen of swine femoral head revealing the three‐dimensional structure of the intraosseous artery, which clearly shows the origin, course and branches, and diameter, as well as the anastomosis, of nutrient arteries in the femoral head. This method provides a simple and rapid technique for quantifying and visualizing intraosseous arteries.

Keywords

• Arteries
• Corrosion casting
• Femoral head
• Intraosseous
• Perfusion
• Swine