Radiometric Re-Compensation of Sentinel-1 SAR Data Products for Artificial Biases due to Antenna Pattern Changes

Abstract

SAR data products for Sentinel-1 have been freely available and delivered operationally on behalf of the European Space Agency since the routine operation of Sentinel-1A in 2014. These products were delivered using the best knowledge at their processing time, in particular with respect to the radiometric calibration. As reprocessing of SAR data products is not foreseen in the nominal processing chain of Sentinel-1, changes of applied processing parameters impact the SAR data quality and can be a disturbing factor for long-term monitoring of radiometric features. In particular, antenna pattern updates produce artificial radiometric steps which are visible in radar backscatter time series, especially in case of monitoring radiometric stable reference targets. This paper introduces a method for correcting changes due to such updates without the need of reprocessing SAR data products. The method was applied to long-lasting time series of data acquisitions which are used to monitor the radiometric performance with reference targets at the DLR calibration site. It has been shown that artificial steps due to antenna pattern updates disappear in backscatter timelines after correct application. Furthermore, the derived absolute radiometric accuracy was improved for the joint observation period of S1A and S1B for almost five years until December 2021.

Keywords

• synthetic aperture radar (SAR)
• Sentinel-1
• radar backscatter
• radiometric accuracy
• SAR system calibration