Transparent ultraviolet-shielding composite films made from dispersing pristine zinc oxide nanoparticles in low-density polyethylene

Abstract

This work proposes an approach to fabricate flexible transparent ultraviolet (UV)-shielding membrane by casting method, which uniformly disperses pristine zinc oxide nanoparticles (NPs) in low-density polyethylene (LDPE). The critical conditions for film fabrication, such as casting temperature, LDPE concentration in the solution, dissolution time, NP concentration, and post hot press cooling processes, are systematically studied. It is found that the casting temperature needs to be close to the melting temperature of LDPE, namely, 115°C, so that transparent film formation without cracks can be guaranteed. NP agglomerates are suppressed if the polymer concentration is controlled below 6%. For good dispersion of NPs, LDPE has to be swelled or unentangled enough in the solution (close to 200 h dissolution time), and then the NP agglomerates can be diminished due to the diffusion of the NPs into the polymer gel (322 h dissolution time). When the NPs are well-dispersed in the LDPE film, the film can completely shield UV light while allowing high transmissivity for the visible light. As the concentration of NPs in the film increases from 4 to 6%, the transmissivity of the film decreases, the tensile strength increases, and the tensile failure strain decreases.

Keywords

• inorganic nanoparticle
• dispersion
• polymer
• solubility
• uv spectrum tailoring