Tight Coupling Dual-Band Coupler With Large Frequency Ratio and Arbitrary Power Division Ratios Over Two Bands

Abstract

To satisfy the requirements of the emerging wireless communication system, the simultaneous implementation of large frequency ratio and tight coupling is demanded for a dual-band coupler. But most of the existing dual-band coupler structures can only achieve one of them. In this paper, a new coupled line based dual-band coupler structure is proposed. The detailed theoretical analysis is conducted for different ranges of frequency ratio. It was shown that a wide frequency ratio from 1.4 to 11.7 can be achieved even for the designs which require a tight coupling of 3 dB. For higher flexibility, the same circuit topology is further investigated to implement the arbitrary power division ratios over the two bands. More importantly, the design parameters for the large frequency ratio and arbitrary power division ratio are found to be almost independent resulting in a simple design procedure. For demonstration purposes, a dual-band 3 dB coupler with a large frequency ratio of 6 is designed, fabricated and measured. Furthermore, another dual-band coupler with coupling coefficients of 3 dB and 6 dB at 2 GHz and 4 GHz is designed, fabricated and measured. Good agreement between simulation and measurement can be observed for both prototypes.

Keywords

• Dual-band coupler
• coupled-line coupler
• large frequency ratio
• arbitrary power division ratio
• tight coupling