Electrophysical Characteristics of Acrylonitrile Butadiene Styrene Composites Filled with Magnetite and Carbon Fiber Fillers
Elena A. Lebedeva,
Elena V. Ivanova,
Denis K. Trukhinov,
Tatiana S. Istomina,
Nikolay S. Knyazev,
Alexander I. Malkin,
Victor A. Chechetkin,
Alexey N. Korotkov,
Maria Balasoiu,
Svetlana A. Astaf’eva
Affiliations
Elena A. Lebedeva
“Institute of Technical Chemistry of UB RAS”—Affiliation of Perm Federal Research Centre of Ural Branch of Russian Academy of Sciences, Akademika Koroleva str., 3, Perm 614013, Russia
Elena V. Ivanova
“Institute of Technical Chemistry of UB RAS”—Affiliation of Perm Federal Research Centre of Ural Branch of Russian Academy of Sciences, Akademika Koroleva str., 3, Perm 614013, Russia
Denis K. Trukhinov
“Institute of Technical Chemistry of UB RAS”—Affiliation of Perm Federal Research Centre of Ural Branch of Russian Academy of Sciences, Akademika Koroleva str., 3, Perm 614013, Russia
Tatiana S. Istomina
“Institute of Technical Chemistry of UB RAS”—Affiliation of Perm Federal Research Centre of Ural Branch of Russian Academy of Sciences, Akademika Koroleva str., 3, Perm 614013, Russia
Nikolay S. Knyazev
Engineering School of Information Technologies, Telecommunications and Control Systems, Ural Federal University, Mira str., 19, Yekaterinburg 620002, Russia
Alexander I. Malkin
Engineering School of Information Technologies, Telecommunications and Control Systems, Ural Federal University, Mira str., 19, Yekaterinburg 620002, Russia
Victor A. Chechetkin
Engineering School of Information Technologies, Telecommunications and Control Systems, Ural Federal University, Mira str., 19, Yekaterinburg 620002, Russia
Alexey N. Korotkov
Engineering School of Information Technologies, Telecommunications and Control Systems, Ural Federal University, Mira str., 19, Yekaterinburg 620002, Russia
Maria Balasoiu
Joint Institute for Nuclear Research, Dubna 141980, Russia
Svetlana A. Astaf’eva
“Institute of Technical Chemistry of UB RAS”—Affiliation of Perm Federal Research Centre of Ural Branch of Russian Academy of Sciences, Akademika Koroleva str., 3, Perm 614013, Russia
With the rapid development of wireless communication technologies and the miniaturization trend in the electronics industry, the reduction of electromagnetic interference has become an important issue. To solve this problem, a lot of attention has been focused on polymer composites with combined functional fillers. In this paper, we report a method for creating an acrylonitrile butadiene styrene (ABS) plastic composite with a low amount of conductive carbon and magnetic fillers preparation. Also, we investigate the mechanical, thermophysical, and electrodynamic characteristics of the resulting composites. Increasing the combined filler amount in the ABS composite from 1 to 5 wt % leads to a composite conductivity growth of almost 50 times. It is necessary to underline the temperature decrease of 5 wt % mass loss and, accordingly, the composite heat resistance reduction with an increase in the combined filler from 1 to 5 wt %, while the thermal conductivity remains almost constant. It was established that electrodynamic and physical–mechanical characteristics depend on the agglomeration of fillers. This work is expected to reveal the potential of combining commercially available fillers to construct effective materials with good electromagnetic interference (EMI) protection using mass production methods (extrusion and injection molding).