Avtomobilʹnyj Transport (Harʹkov) (Jun 2018)
ON THE ISSUE OF THE USE OF ROLLER-COMPACTED CEMENT-CONCRETE MIXTURES FOR CONSTRUCTION OF ROAD PAVEMENTS
Abstract
Problem. At present, on the existing roads of Ukraine the construction of road pavement does not meet the requirements for durability and load-carrying capacity, because of constant increase in traffic intensity, the emergence of new types of vehicles with increased axle loads and uncontrolled transport overload. The widespread use of roller-compacted cement mixes (RCC mixes) in the construction of road pavements for highways will solve these problems. Goal. The aim of the work is to study the effect of the components of a rigid cement-concrete mixture on the physical and mechanical properties of concrete, as well as the industrial introduction of the technology of RCC in Kharkiv. Methods. The methods for assessing RCC characteristics allow to carry out all necessary research on the basis of existing regulations in Ukraine. Results. As a result of the studies carried out, compositions of RCC mixtures on local materials with compressive strengths of 60 MPa were obtained, with a bending strength of more than 4.5 MPa, density of 2420 kg/m3 and frost resistance of F200. Novelty. The scientific novelty of the construction works is in the selection of the compositions of RCC mixes by ap-plying high-quality cement, fine sand, two (or three) fractions of rubble, mineral additives, complex additives and nonmetallic fibers, which leads to an increase in the density and strength of the RCC, and also increases the durability of the cement concrete coatings compacted. Practical value. Labora-tory research and selection of cement-concrete mixes for production of RCC used in the construction of road pavements were carried out to prove the aims of the work, as well as industrial introduction of the technology of RCC mortar has been carried out by laying the road section on the territory of the enterprise in Kharkiv city.
Keywords
