Investigation of Liquid Metal Embrittlement during Resistance Spot Welding of Martensitic Steel with Zn Jet Vapor-Deposited Coating

Abstract

Advanced high-strength steels protected by zinc coatings have contributed to a reduction in CO2 emissions in the automotive industry. However, the liquid metal embrittlement (LME) of the Fe/Zn couple induced by simultaneously acting stresses and high temperatures during resistance spot welding could be the cause of unexpected failure. We investigated the possible risk of LME in spot-welded martensitic steel with Zn jet vapor-deposited coating and its influence on weld strength. The weld nugget cross-sections were analyzed (optical microscopy, SEM-EDS), and their tensile shear strengths were compared with their uncoated counterparts. LME cracks were observed in all samples meeting the process window (6, 6.5, 7 kA) located at the edge of the sheet/electrode indentation area. The frequency and length of cracks increased with current, and the occurrence of Zn within cracks indicated the LME mechanism. The shear tests showed the Zn-coated sample underwent a decrease in tensile shear strength that was most evident at a welding current of 7 kA (13.2%). However, LME was excluded as a cause of lower strength. The decrease was attributed to the smaller nugget diameter and the thin slit of Zn coating remaining in the weld notch.

Keywords

• liquid metal embrittlement
• resistance spot welding
• jet vapor deposition
• martensitic steel