Experimental Investigations on the Impact of Hydrogen Injection Apertures in Pulsed Detonation Combustor

Abstract

Combustion through detonation marks an important leap in efficiency over standard deflagration methods. This research introduces a Pulsed Detonation Combustor (PDC) model that uses Hydrogen as fuel and Oxygen as an oxidizer, specifically targeting carbon-free combustion efforts. The PDC aerodynamic features boost operating cycle frequency and facilitate Deflagration-to-Detonation Transition (DDT) within distances less than 200 mm by means of Hartmann–Sprenger resonators and cross-flow fuel/oxidizer injection. The achievement of quality mixing in a short-time filling process represents not only higher cycle operation but also enhanced performances. The scope of this paper is to assess the impact of different fuel injectors with different opening areas on the performances of the PDC. This assessment, expressed as a function of the Equivalence Ratio (ER), is conducted using two primary methods. Instantaneous static pressures are recorded and processed to extract the maximum and average cycle pressure and characterize the pressure augmentation. Thrust measurements obtained using a load cell are averaged over the detonation cycle to calculate the time-averaged thrust. The specific impulse is subsequently determined based on these thrust measurements and the corresponding mass flow data.

Keywords

• pulsed detonation combustor
• hydrogen-fueled propulsion
• advanced cycle
• high-speed experimental analysis
• power and energy conversion
• renewable energy