Achieving excellent strength and ductility of 24CrNiMoY alloy steel fabricated by high power selective laser melting technology

Abstract

In order to increase the productivity, new generation of selective laser melting (SLM) machines are evolving towards higher power lasers. In this paper, the microstructure evolution and mechanical properties of 24CrNiMoY alloy steel fabricated by high power selective laser melting (HP-SLM) have been reported. The results show that with the optimized laser power over 400 W, the powder layer thickness can be increased to 60 μm, and the theoretical productivity reaches 7.2 mm3/s, which is more than two times of the normal SLM technology. As the laser energy density increases, the structure of melt pool changes from a thermal conduction mode to a keyhole mode, and the microstructure mainly consists of martensite, bainite and pre-eutectic ferrite, and the phase composition of the specimen is α-Fe phase and a small amount of Fe3C,with fine grain size and irregular orientation. When the laser energy density is 68 J/mm3, the microhardness of the specimen is 410HV0.2, the tensile strength reaches 1121 MPa and the percentage elongation after fracture is 11.5%, which realizes a good match between strength and ductility. The fine tempered martensite and lower bainite in the microstructure is the key to excellent strength and ductility. This research is of guiding significance and serves as a technical reference for understanding the microstructure evolution and mechanical properties of HP-SLM 24CrNiMoY alloy steel.

Keywords

• Selective laser melting
• 24CrNiMoY alloy steel
• High power
• Internal defect
• Microstructure transformation