Towards energy efficiency: retrofitting existing office buildings using smart technologies

Abstract

Abstract Buildings are considered one of the main causes of increasing CO2 emissions due to their excessive consumption of energy. The drive towards sustainability represents a challenge especially in existing buildings. The aim of the research is to support the built environment’s move onto a low-carbon path using smart technologies. This research highlights the role of smart building technologies in increasing energy savings of office buildings in Egypt, taking into consideration their incremental cost. Based upon data available on Excellence in Design for Greater Efficiencies (EDGE) website, association rule has been applied using Apriori Algorithm to identify the most used smart technologies in EDGE-certified office buildings, in addition to the different smart-orientated retrofitting scenarios that could be applied. Using EDGE software, energy assessment of an existing office building in Egypt was performed. This assessment acts as a “reference point” to quantify the impact of each smart technology and retrofitting scenario on the energy savings, incremental costs, and payback period. Limitations of the application of the different smart technologies impacted the selection process for the different scenarios. These limitations can be summarized in the suitability of application in the existing building’s systems, the availability and cost in the local market, and the potential of the building’s infrastructure adaptation to the proposed technologies. Based upon the above limitations, the best scenario was selected. Results showed that smart technologies have a great role in retrofitting of office buildings reaching more than 20% energy savings. In addition, the high initial cost of applying smart technologies could be covered within around 3 years of operation. This research could be used as a guide for improving energy performance of existing office buildings in Egypt using smart technologies.

Keywords

• Smart building technologies
• Office buildings
• Energy savings
• Retrofitting existing buildings
• EDGE
• Association rule