Double coaxial pipe jet control using DBD-PA and bluff body

Abstract

In this study, a double-tube burner nozzle with a DBD-PA (dielectric barrier discharge plasma actuator) and flame holder was employed to regulate the lifted flame. The flame holder held the lifted flame and the DBD-PA regulated the lifted flame to suppress the lifted flame’s vertical oscillation. To form a lifted flame, pseudo-biogas, a mixture of CH4 and CO2 in the ratio of 6:4, was jetted out through an inner nozzle and air through an annular nozzle. To control the air jet and prevent the lifted flame’s vertical oscillation, the DBD-PA was installed inside an annular nozzle. The DBD-PA was driven intermittently at regular intervals to produce a tangential flow in the same direction as the jetting gas, and the flame holder was placed above the nozzle outlet on the nozzle center axis. The finding indicated that by driving the DBD-PA at the slightly lower frequency than the frequency of the naturally shedding vortices in the free jet, the lifted flame’s vertical oscillation can be reduced by collapsing the jet’s vortex ring at a steady position and with a steady cycle. By impeding the lifted flame’s vertical oscillation, it is forecasted to reduce the blowout of the lifted flame and combustion noise.

Keywords

• jet
• dielectric barrier discharge plasma actuator(dbd-pa)
• flame holder
• lifted flame
• double-tube burner nozzle
• combustion noise