Optimization Study of Annular Wear-Resistant Layer Structure for Blast Furnace Tuyere

Abstract

A new tuyere small sleeve coating structure that balances the high thermal conductivity of the copper substrate with the high wear resistance of the protective layer was developed in this paper. This structure can achieve a low-carbon blast furnace by reducing the heat loss from the tuyere. The 3D model was established via Solidworks for modeling and Ansys for numerical simulation, the temperature field of the annular wear-resistant layer structure tuyere small sleeve with different widths of the wear-resistant layer was analyzed and compared with the temperature and stress field of traditional tuyere small sleeve. The results show that the design of the annular wear-resistant layer structure of the tuyere small sleeve is more effective. The new annular wear-resistant layer structure for the tuyere small sleeve results in a decrease of 24 K in the average temperature of the wear-resistant coating. The comparison of this structure with tuyere sleeves without wear-resistant coatings shows a 16.7% reduction in heat loss, improves the wear resistance of the tuyere, providing new technological ideas for low-carbon blast furnace production. Compared with the tuyere sleeve completely covered with a wear-resistant coating, the maximum thermal stress of this structure decreased from 624.98 Mpa to 427.99 Mpa, resulting in a reduction of 31.5%, which is beneficial for the service life of the tuyere sleeve. The copper surface temperature of the new tuyere small sleeve is in a safe range when the temperature is below 2273 K.

Keywords

• blast furnace tuyere
• wear-resistant layer
• temperature field
• stress field
• low-carbon technology