Aspen Simulation Study of Dual-Fluidized Bed Biomass Gasification

Abstract

This article establishes a thermodynamic model of a dual-fluidized bed biomass gasification process based on the Aspen Plus software platform and studies the operational control characteristics of the dual-fluidized bed. Firstly, the reliability of the model is verified by comparing it with the existing experimental data, and then the influence of different process parameters on the operation and gasification characteristics of the dual-fluidized bed system is investigated. The main parameters studied in the operational process include the fuel feed rate, steam/biomass ratio (S/B), air equivalent ratio (ER), and circulating bed material amount, etc. Their influence on the gasification product composition, reactor temperature, gas heat value (QV), gas production rate (GV), carbon conversion rate (ηc), and gasification efficiency (η) is investigated. The study finds that fuel feed rate and circulating bed material amount are positively correlated with QV, ηc, and η; ER is positively correlated with GV and ηc but negatively correlated with QV and η; S/B is positively correlated with GV, ηc, and η but negatively correlated with QV. The addition of CaO is beneficial for increasing QV. In actual operation, a lower reaction temperature in the gasification bed can be achieved by reducing the circulating bed material amount, and a larger temperature difference between the combustion furnace and the gasification furnace helps to further improve the quality of the gas. At the same time, GV, ηc, and η need to be considered to find the most optimized operating conditions for maximizing the benefits. The model simulation results agree well with the experimental data, providing a reference for the operation and design of dual-fluidized beds and chemical looping technology based on dual-fluidized beds.

Keywords

• gasification
• herb residues
• dual-fluidized bed
• Aspen simulation
• chemical looping