Performance Enhancement of Opened Resonance Photoacoustic Cells Based on Three Dimensional Topology Optimization
Zihao Tang,
Wenjun Ni,
Zehao Li,
Jin Hou,
Shaoping Chen,
Perry Ping Shum,
Chunyong Yang
Affiliations
Zihao Tang
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Wenjun Ni
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Zehao Li
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Jin Hou
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Shaoping Chen
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Perry Ping Shum
Department of Electrical and Electronic Engineering, College of Engineering, Southern University of Science and Technology, Shenzhen 518055, China
Chunyong Yang
Hubei Key Laboratory of Intelligent Wireless Communications, Hubei Engineering Research Center of Intelligent Internet of Things Technology, College of Electronics and Information Engineering, South-Central University for Nationalities, Wuhan 430074, China
Photoacoustic (PA) spectroscopy techniques enable the detection of trace substances. However, lower threshold detection requirements are increasingly common in practical applications. Thus, we propose a systematic geometry topology optimization approach on a PA cell to enhance the intensity of its detection signal. The model of topology optimization and pressure acoustics in the finite element method was exploited to construct a PA cell and then acquire the optimal structure. In the assessment, a thermo-acoustic model was constructed to properly simulate the frequency response over the range of 0–70 kHz and the temperature field distribution. The simulation results revealed that the acoustic gain of the optimized cell was 2.7 and 1.3 times higher than conventional cells near 25 and 52 kHz, respectively. Moreover, the optimized PA cell achieved a lower threshold detection over a wide frequency range. Ultimately, this study paves a new way for designing and optimizing the geometry of multifarious high-sensitivity PA sensors.
