Influence of Artificial Aging Time on Microstructures and Mechanical Properties of Porthole Die Extruded 6063 Aluminum Alloy

Abstract

The influence of artificial aging time on the microstructures and mechanical properties of the 6063 aluminum alloy profile extruded by porthole die was investigated through hardness testing, expansion testing, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results showed that the artificial aging time had a significant impact on the size, morphology, distribution of precipitated phases, and mechanical properties of the porthole die extruded 6063 aluminum alloy profiles. As the artificial aging time increased, the second phase particles gradually precipitated, and the precipitation strengthening gradually enhanced, resulting in an increase in the hardness of the profile. The hardness of the welding zone was lower than that of the matrix zone. Compared with the precipitation in the matrix zone, the size and distribution of the precipitates were uneven, and the time for the precipitation was long in the welding zone due to the influence of grain size. The width of the precipitate free zone (PFZ) in the welding zone was greater than that in the matrix zone. The expansion ratio decreased with the increase of aging time, which indicated that the artificial aging treatment was adverse to the plastic deformation ability of the profiles.

Keywords

• aluminum alloy
• artificial aging
• hardness
• welding zone