Experimental Studies of Combustion and Emission Characteristics of Biomass Producer Gas (BPG) in a Constant Volume Combustion Chamber (CVCC) System

Abstract

Most of the world’s energy requirements are still derived from natural resources. This will result in a catastrophic energy crisis with negative environmental consequences. The increased energy supply will result in greater consumption of non-renewable sources. The production of biomass producer gas (BPG) from biomass gasification has received significant attention as an alternative fuel due to the depletion of non-renewable resources. This experimental study aimed to determine the flame propagation, flame propagation speed, and chamber pressure trace of BPG at different equivalence ratios. Understanding the characteristics of the BPG’s combustion, finding lower greenhouse gas emissions of BPG, and minimizing the use of fossil fuels is necessary to mitigate these problems. Using the direct visualization technique, an optical constant volume combustion chamber (CVCC) was developed to measure combustion characteristics. Liquid petroleum gas (LPG) was used to compare the flame propagation speed in the CVCC calibration. In comparison to wood pellet (WP), coconut husk (CH), and palm kernel shell (PKS), the chamber peak pressure at ϕ equal to 1 of CH for the combustion of BPG was the lowest at 20.84 bar. At ϕ of 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, and 1.3, the chamber peak pressure of CH was discovered to be around 17.77, 18.12, 18.81, 20.84, 20.39, 17.25, and 16.37 bar, respectively. Compared to the other two types of BPG, CH produced the lowest emissions of CO2 and CO at 2.03% and 0.022%, respectively. In conclusion, the CH had the lowest chamber peak pressure and emissions due to the lower heating value (LHV) being relatively lower.

Keywords

• renewable energy
• biomass producer gas
• constant volume combustion chamber
• flame propagation
• chamber pressure
• emission