Development of a bending test procedure for the characterization of flexible ECoG electrode arrays

Abstract

An automatized mechanical test has been developed to characterize flexible ECoG and grid electrode arrays under cyclic bending load. Electrodes with different test structures were designed and the bending cycle dependant failure rate was found to follow a Weibull distribution. A corresponding failure mode analysis revealed a characteristic lifetime of more than 25000 bending cycles for some designs. However, design parameters as e.g. a smaller track width reduced this lifetime by a factor of two. In comparison to a similar BMI grid electrode array which was implanted for several months in an animal, failure patterns were comparable to those simulated with the bending test.

Keywords

• ecog electrode
• bending stability
• reliability