Improving the fire-retardant performance of industrial reactive coatings for steel building structures

Abstract

The main aim of this study was to determine key factors that regulate fire-retardant effectiveness of intumescent coatings comprising of ammonium polyphosphate, melamine, pentaerythritol, polymer binder. Fulfillment of the research objectives resulted in the development of a coating with R120 fire resistance. The expected service life of the coating is at least 15 years when applied at Z2 type of environmental conditions (indoor use). It was established that in order to provide fire resistance of around R30 it is advisable to use the styrene-acrylic polymers as binders for both water-based and organic-based intumescent systems. The ratio of target components ammonium polyphosphate/melamine/pentaerythritol in such systems should be close to 2/1/1. The coating thickness is to be 0.4–0.5 mm. To achieve higher fire resistance (R60 or more) the coating should include a vinyl acetate derivative as a binder (copolymers with ethylene or vinylversatate). Target components ratio in this case is to be close to 3.5/1/1.5, while the coating thickness should be kept at 1.6–1.8 mm. If the required class of fire resistance is above R120, coating thickness is usually to be kept above 3.5 mm. In order to achieve higher fire resistance, it is advisable to use nano-clay additives and reinforcing fibers in intumescent compositions.The obtained results were used in the development of intumescent coating, which is produced industrially and provides over R120 fire resistance of steel, which was confirmed in standardized full-scale fire tests.

Keywords

• Fire-retardant coatings
• Intumescent coatings
• Ammonium polyphosphate
• Melamine
• Pentaerythritol
• Fire protection of steel