Evaluation of the Corrosion Depth of Double Bottom Longitudinal Girder on Aging Bulk Carriers

Abstract

The longitudinal girder (LG) between fuel oil tanks (FOT) and water ballast tanks in the double bottoms of ships represent critical structural parts whose watertight nature could be harmed by corrosion, thus, causing the pollution of water ballast tanks and adjacent areas. The new common structural rules (CSR) define the minimum thickness values of structural elements and corrosion margins. The assessment of the deviations from the prescribed values during ship operation could optimize the prescribed criteria. Assuming that corrosive processes begin after four years of operation, the paper analyzes a linear model that describes the percentage of plate wear as a function of the built-in thickness of LG of FOT. The research included 20 ships and provided the database for 1918 corrosion depth values. The gauging records included the average values of the original thickness of steel plates grouped in three intervals (11–13 mm, 13–15 mm, 15–18 mm). Based on the difference between the built-in and subsequently measured values, the paper analyzes the percentage of thickness reduction due to corrosion, concerning the original plate thickness. The findings of the research should facilitate the optimization of corrosion margins and prevent potential structural collapse and pollution.

Keywords

• ships corrosion
• longitudinal girder
• corrosion depth
• linear model