Nanomaterials (Mar 2019)

KMnF<sub>3</sub>:Yb<sup>3+</sup>,Er<sup>3+</sup> Core-Active-Shell Nanoparticles with Broadband Down-Shifting Luminescence at 1.5 μm for Polymer-Based Waveguide Amplifiers

  • Yongling Zhang,
  • Peng Lv,
  • Dongxia Wang,
  • Zhengkun Qin,
  • Fei Wang,
  • Daming Zhang,
  • Dan Zhao,
  • Guanshi Qin,
  • Weiping Qin

DOI
https://doi.org/10.3390/nano9030463
Journal volume & issue
Vol. 9, no. 3
p. 463

Abstract

Read online

In this study, we prepared cubic-phase oleic-acid-coated KMnF3: Yb3+,Er3+ nanoparticles (NPs) and NaYF4:Yb3+,Er3+ NPs, which were about 23 nm. From the down-shifting emissions spectra of the two NPs obtained by 980 nm excitation, we observed the fact that the KMnF3: 18%Yb3+,1%Er3+ NPs were a luminescent material with a broadband near-infrared emission of 1.5 μm, and full-width at half-maximum (FWHM) of 55 cm−1, which was wider than that of the NaYF4: 18%Yb3+,1% NPs. Therefore, we believe that the oleic-acid-coated KMnF3:Yb3+,Er3+ NPs have great potential in fabricating broadband waveguide amplifiers. Through epitaxial growth of a KMnF3: Yb3+ active-shell on the core NPs, we compounded KMnF3:Yb3+,Er3+@KMnF3:Yb3+ core-active-shell NPs whose 1.5-μm infrared emissions intensity was 3.4 times as strong as that of the core NPs. In addition, we manufactured waveguide amplifiers using KMnF3:18%Yb3+,1%Er3+@KMnF3:2%Yb3+ NPs as the core materials of the waveguide amplifiers. When the input signal power was 0.2 mW and the pump power was 200 mW, we achieved a relative gain of 0.6 dB at 1534 nm in a 10-mm long waveguide.

Keywords