Materials Research Express (Jan 2020)

Determination of capture barrier energy of the E-center in palladium Schottky barrier diodes of antimony-doped germanium by varying the pulse width

  • E Omotoso,
  • A T Paradzah,
  • E Igumbor,
  • B A Taleatu,
  • W E Meyer,
  • F D Auret

DOI
https://doi.org/10.1088/2053-1591/ab6c1c
Journal volume & issue
Vol. 7, no. 2
p. 025901

Abstract

Read online

The capture barrier energy of the E-center deep level defect introduced in Pd/Sb-doped Ge by alpha-particle irradiation has been studied. Palladium Schottky barrier diodes (SBDs) fabricated by resistive evaporation technique were successfully characterised by current-voltage ( I-V ), capacitance-voltage ( C-V ), conventional and Laplace deep level transient spectroscopy. The rectification quality of Schottky contacts before and after irradiation was confirmed by I-V and C-V results. The ideality factor and doping density were determined to be in the range of 1.23 to 1.46 and 3.55 × 10 ^15 to 5.25 × 10 ^15 cm ^−3 , respectively before and after irradiating the device with alpha-particles. The thermal emission activation energy and the apparent capture cross section of the E-center were determined from the Arrhenius plot to be 0.37 eV and 1.3 × 10 ^−15 cm ^2 , respectively. The capture barrier energyand the true capture cross section of the E-center were calculated to be 0.052 eV and 2.25 × 10 ^−17 cm ^2 , respectively from the experimental findings after varying the pulse width at different temperature range from 145 to 180 K in steps of 5 K.

Keywords