Simplification of KDS 14 Design Method for Slab–Column Connections Subjected to Unbalanced Moment

Abstract

Abstract The current KDS 14 design method yields reasonable accuracy with acceptable safety in assessing the unbalanced moment-carrying capacity of slab–column connections. However, the model requires considerable computational effort owing to the effects of various design parameters, particularly the gravity-load effect. This study proposes a method to simplify the KDS 14 model to evaluate the unbalanced moment-carrying capacity of slab–column connections. In the proposed method, the gravity-load effect is decoupled from equations used for evaluating unbalanced moment-carrying capacity components. Subsequently, the total unbalanced moment-carrying capacity is determined by establishing an interaction between the gravity shear ratio and unbalanced moment components without considering the gravity-load effect. For practical design purposes, final simplified design equations are proposed. The reliability of the simplified method is validated based on a comparison with the current KDS 14 design code using a comprehensive database encompassing interior, exterior, and corner slab–column connections. Furthermore, a parametric study based on the proposed simplified approach, current design codes, combined with finite-element (FE) analysis is performed to elucidate the effects of constituents on the unbalanced moment-carrying capacity of corner slab–column connections. The results show that the proposed simplified model and KDS design method are strongly correlated with the experimental and FE results for a range of design parameters. Meanwhile, the ACI 318 model consistently provides a lower limit for strength prediction, thus yielding overly conservative and safe results compared with the test and FE results in most cases.

Keywords

• Slab–column connections
• Strength model
• Eccentric shear
• Punching shear strength
• Unbalanced moment