Effect of Precipitated Particles on Austenite Grain Growth of Al- and Nb-Microalloyed 20MnCr Gear Steel

Abstract

The paper deals with the effect of the morphology characteristics, grain size, and the volume fraction of AlN- and NbC-precipitated particles on the prior austenite grain growth behavior in the Al- and Nb-microalloying 20MnCr gear steel during pseudo-carburizing heat treatments. The results indicate that the Nb addition in 20MnCr gear steel have a better effect on preventing austenite grain growth. The coarsening time after pseudo-carburizing in the Nb-microalloyed 20MnCr steel are improved by about 4 h compared with the Al-microalloyed steel. The precipitated particles coarsen and the number decreases with the pseudo-carburization temperature increasing, resulting in a reduction in the pinning pressure of the precipitated particles on the austenite grain boundaries. When the pseudo-carburization temperature reaches 1150 °C, the precipitated particles no longer have the ability to pin the austenite grain boundaries. In addition, the kinetics model for austenite grain growth under the process of the pinning and coarsening of the precipitated particles was established.

Keywords

• microalloying
• precipitated particles
• austenite grain growth
• pinning pressure