Interface slip of steel–concrete composite beams reinforced with CFRP sheet under creep effect

Abstract

Abstract Under the creep action of composite steel and concrete beams reinforced by carbon-fiber-reinforced polymer (CFRP) sheet, the face of the CFRP sheet, steel beam, and concrete slab beam produce relative slip. This slip affects the interface interaction, reduces the bearing capacity and stiffness of the members, and increases the deformation. In this paper, elastic and energy methods are used to analyze the interface forces between steel beams and concrete slabs reinforced by CFRP sheeting under the action of concrete creep. The calculation formulas for interface slip, axial force, and incremental deformation are established. The influence of design parameters on the mechanical properties of the interface is analyzed. Results show that the increments in interface slip, axial force, and deformation are zero on the 28th day. With increasing age, the increments in interface slip, axial force, and deformation gradually increase, and the increase is large in the first 100 days; it basically remains unchanged during the time interval from 100 to 1028 days. When the load increases by 5 N/mm (5 kN), the slip increments increase by approximately 0.004 mm, 0.002 mm, and 0.002 mm. The increments in axial force are approximately 19.4 kN, 15.9 kN, and 16.1 kN. The deformation increments increase by approximately 1.7 mm, 1.1 mm, and 0.6 mm.