Passive Vision Detection of Torch Pose in Swing Arc Narrow Gap Welding

Abstract

To enhance the synchronous detection of the horizontal and vertical positions of the torch in swing arc narrow gap welding, a torch pose detection (TPD) method is proposed. This approach utilizes passive visual sensing to capture images of the arc on the groove sidewall, using advanced image processing methods to extract and fit the arc contour. The coordinates of the arc contour center point and the highest point are determined through the arc contour fitting line. The torch center position is calculated from the average horizontal coordinates of the arc contour centers in adjacent welding images, while the height position is determined from the vertical coordinate of the arc’s highest point. Experimental validation in both variable and constant groove welding conditions demonstrated the TPD method’s accuracy within 0.32 mm for detecting the torch center position. This method eliminates the need to construct the wire centerline, which was a requirement in previous approaches, thereby reducing the impact of wire straightness on detection accuracy. The proposed TPD method successfully achieves simultaneous detection of the torch center and height positions, laying the foundation for intelligent detection and adaptive control in swing arc narrow gap welding.

Keywords

• swing arc narrow gap welding
• torch pose
• passive visual sensing
• image processing