A Chirp-Rate-Tunable Microwave Photonic Pulse Compression System for Multi-Octave Linearly Chirped Microwave Waveform

Abstract

A chirp-rate-tunable microwave photonic pulse compression system for multi-octave linearly chirped microwave waveform (LCMW) is proposed in this paper. The key components are a dual-parallel Mach-Zehnder modulator (DPMZM) and a dispersive loop (DL) structure based on a linear chirped fiber Bragg grating. By controlling the output of the DL to change the accumulated group velocity dispersion, the chirp rate of the system can be tuned. By adjusting the wavelength of the optical carrier to select the single sideband modulated optical signal (positive or negative sideband), the chirp direction (down or up chirped) can also be tuned. The performance of the multi-octave LCMW pulse compression can be improved by eliminating the second-order harmonic distortion through configuring the bias voltages of the DPMZM. Detailed theoretical analysis is conducted. A verification simulation demonstrates the pulse compression of the multi-octave LCMWs with the chirp rates of 23.877, 11.939, 3.979, and -3.979 GHz/ns. In the proof-of-concept experiment, the matched chirp rates 23.229, 12.051, -22.568, and -11.355 GHz/ns are obtained. The multi-octave LCMW pulse compressions with the compression ratios of 14.3, 29.3, 15.0, and 28.6 are verified. The simulation and experiment results are in good agreement with the theoretical analysis.

Keywords

• Pulse compression
• fiber gratings
• microwave photonics signal processing.