Synthesis and evaluation of layered double hydroxide based sorbent for hot gas cleanup of hydrogen chloride

Abstract

In this study, we report on the synthesis and evaluation of a sodium, magnesium, and aluminum (Na-Mg-Al) layered double hydroxide (LDH) based sorbent for hydrogen chloride (HCl) removal at concentrations found in lignocellulosic biomass derived syngas. The LDH was synthesized by a spontaneous self-assembly method and further calcined at 700 °C to produce a mixed metal oxide sorbent that we evaluated in the hot gas cleanup of hydrogen chloride at 100 parts per million. The performance of this sorbent was evaluated in a fixed bed reactor from 400 to 600 °C against that of a commercial magnesium and aluminum LDH (ComLDH) material that does not contain sodium in the matrix as well as two other commercial sorbents, sodium carbonate (Na2CO3) and sodium aluminate (NaAlO2).Our Na-Mg-Al LDH is thermally stable in the hot gas cleanup temperature range. During fixed bed experiments, our calcined LDH mixed metal oxide was effective in reducing hydrogen chloride’s concentration below the breakthrough concentration of 1 ppm from 400 to 600 °C for more than 14 h. The better performance of our calcined LDH compared to calcined commercial LDH supported our hypothesis that sodium incorporation in the LDH matrix enhances HCl sorption. Based on comparison against the commercial Na-based sorbents, the following rankings by temperature observed: LDH > NaAlO2 > Na2CO3 at 400 °C; LDH = NaAlO2 > Na2CO3 at 500 °C; and Na2CO3 = NaAlO2 = LDH at 600 °C.

Keywords

• Layered double hydroxide (LDH)
• Hot gas cleanup
• Hydrogen chloride
• Sorption