Impacts of Spatial Resolution and XCO₂ Precision on Satellite Capability for CO₂ Plumes Detection

Abstract

Greenhouse gas satellites can provide consistently global CO2 data which are important inputs for the top-down inverse estimation of CO2 emissions and their dynamic changes. By tracking greenhouse gas emissions, policymakers and businesses can identify areas where reductions are needed most and implement effective strategies to reduce their impact on the environment. Monitoring greenhouse gases provides valuable data for scientists studying climate change. The requirements for CO2 emissions monitoring and verification support capacity drive the payload design of future CO2 satellites. In this study, we quantitatively evaluate the performance of satellite in detecting CO2 plumes from power plants based on an improved Gaussian plume model, with focus on impacts of the satellite spatial resolution and the satellite-derived XCO2 precision under different meteorological conditions. The simulations of CO2 plumes indicate that the enhanced spatial resolution and XCO2 precision can significantly improve the detection capability of satellite, especially for small-sized power plants with emissions below 6 Mt CO2/yr. The satellite-detected maximum of XCO2 enhancement strongly varies with the wind condition. For a satellite with a XCO2 precision of 0.7 ppm and a spatial resolution of 2 km, it can recognize a power plant with emissions of 2.69 Mt CO2/yr at a wind speed of 2 m/s, while its emission needs be larger than 5.1 Mt CO2/yr if the power plant is expected to be detected at a wind speed of 4 m/s. Considering the uncertainties in the simulated wind field, the satellite-derived XCO2 measurements and the hypothesized CO2 emissions, their cumulative contribution to the overall accuracy of the satellite’s ability to identify realistic enhancement in XCO2 are investigated in the future. The uncertainties of ΔXCO2 caused by the uncertainty in wind speed is more significant than those introduced from the uncertainty in wind direction. In the case of a power plant emitting 5.1 Mt CO2/yr, with the wind speed increasing from 0.5 m/s to 4 m/s, the simulated ΔXCO2 uncertainty associated with the wind field ranges from 3.75 ± 2.01 ppm to 0.46 ± 0.24 ppm and from 1.82 ± 0.95 ppm to 0.22 ± 0.11 ppm for 1 × 1 km2 and 2 × 2 km2 pixel size, respectively. Generally, even for a wind direction with a higher overall uncertainty, satellite still has a more effective capability for detecting CO2 emission on this wind direction, because there is more rapid growth for simulated maximal XCO2 enhancements than that for overall uncertainties. A designed spatial resolution of satellite better than 1 km and a XCO2 precision higher than 0.7 ppm are suggested, because the CO2 emission from small-sized power plants is much more likely be detected when the wind speed is below 3 m/s. Although spatial resolution and observed precision parameters are not sufficient to support the full design of future CO2 satellites, this study still can provide valuable insights for enhancing satellite monitoring of anthropogenic CO2 emissions.

Keywords

• anthropogenic CO₂ emissions
• satellite design
• Gaussian plume model
• spatial resolution
• XCO₂ precision