Balanced-to-Balanced Microstrip Diplexer Based on Magnetically Coupled Resonators

Abstract

Two balanced-to-balanced planar diplexers based on magnetically coupled microstrip resonators are proposed in this paper. For the first prototype, each channel/differential-output is composed of a second order single-band balanced bandpass filter based on open-loop resonators. For the second diplexer example, the filters composing the differential outputs are fourth order and are implemented by means of folded stepped-impedance resonators. The design procedure for the differential response is quite straightforward, since it is based on the use of the well-known external quality factor and coupling coefficients concepts. Common-mode is inherently rejected thanks to the benefits of magnetic coupling, which precludes common-mode transmission over a wide frequency range. The proposed structure also offers a high level of channel-to-channel isolation. To demonstrate the usefulness of the proposed idea, the two prototypes are simulated, fabricated, and measured. Good differential-mode and common-mode performance is observed in both examples. Simulations and measurements show good agreement.

Keywords

• Balanced-to-balanced diplexer
• common-mode rejection
• differential-mode
• magnetic coupling
• microstrip resonators