Lower Limb Exoskeleton for Rehabilitation with Flexible Joints and Movement Routines Commanded by Electromyography and Baropodometry Sensors
Yukio Rosales-Luengas,
Karina I. Espinosa-Espejel,
Ricardo Lopéz-Gutiérrez,
Sergio Salazar,
Rogelio Lozano
Affiliations
Yukio Rosales-Luengas
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV), Av. IPN #2508, San Pedro Zacatenco, Mexico City 07360, Mexico
Karina I. Espinosa-Espejel
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV), Av. IPN #2508, San Pedro Zacatenco, Mexico City 07360, Mexico
Ricardo Lopéz-Gutiérrez
Investigador por México-Consejo Nacional de Humanidades, Ciencias y Tegnologías (IXM-CONAHCYT), Av. de los Insurgentes Sur #1582, Crédito Constructor, Benito Juárez, Mexico City 03940, Mexico
Sergio Salazar
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV), Av. IPN #2508, San Pedro Zacatenco, Mexico City 07360, Mexico
Rogelio Lozano
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV), Av. IPN #2508, San Pedro Zacatenco, Mexico City 07360, Mexico
This paper presents the development of an instrumented exoskeleton with baropodometry, electromyography, and torque sensors. The six degrees of freedom (Dof) exoskeleton has a human intention detection system based on a classifier of electromyographic signals coming from four sensors placed in the muscles of the lower extremity together with baropodometric signals from four resistive load sensors placed at the front and rear parts of both feet. In addition, the exoskeleton is instrumented with four flexible actuators coupled with torque sensors. The main objective of the paper was the development of a lower limb therapy exoskeleton, articulated at hip and knees to allow the performance of three types of motion depending on the detected user’s intention: sitting to standing, standing to sitting, and standing to walking. In addition, the paper presents the development of a dynamical model and the implementation of a feedback control in the exoskeleton.