Optimized Design of Sponge-Type Comprehensive Pipe Corridor Rainwater Chamber Based on NSGA-III Algorithm

Abstract

Currently, most of the studies using optimization algorithms to mitigate the urban flooding problem have no more than three optimization objectives, and few of them take the operation status of the traditional drainage system as one of the optimization objectives, which is not conducive to the overall design of the city. This study proposes to mitigate the urban flooding problem by using a sponge-type comprehensive pipe corridor rainwater chamber. A four-objective optimization model is established by coupling the Storm Water Management Model (SWMM) and the Non-dominated Sorting Genetic Algorithm-III (NSGA-III), and two traditional drainage system state indicators (pipe overload time, node overflow volume), surface runoff coefficient, and total investment cost are selected as the optimization objectives for solving the problem. The results show that (1) the reduction rates of surface runoff coefficient, pipe overload time, and node overflow volume rate by the optimization model are 37.015–56.917%, 81.538–91.435%, and 51.578–84.963%, respectively; and the total investment cost is RMB 4.311–4.501 billion. (2) The effectiveness of combining SWMM and NSGA-III for an optimization solution is verified, and the relationship between the four objectives is explored. The study may provide useful information for urban flood control.

Keywords

• urban flooding
• comprehensive pipe corridor rainwater chamber
• LID
• NSGA-III
• SWMM