Engineering and Technology Journal (Sep 2009)

Optimization of Asphalt Mix Improved by the Addition of Scrap Tires

  • Falak O. Abass,
  • Mohammed O. Abass,
  • Raghad O. Abass

DOI
https://doi.org/10.30684/etj.27.12.14
Journal volume & issue
Vol. 27, no. 12
pp. 2425 – 2446

Abstract

Read online

The design of improved asphalt mix is achieved by the use of three majorvariables , weight of scrap tires replaced by coarse base aggregate , particles size of scrap tires finally the weight of binder used (bitumen). The improved asphalt mix (IAM) requires a balance between rutresistance and durability to resist cracking and moisture damage (stripping) .Accordingly several factors that influence rut resistance and durability are considered during the design process: The mix consisted of binder (3.0-6.5) %wt. , scrap tires (10-30) wt% withparticle size of (1-5) cm , is achieved by the application of box-Wilson design program. The improved mix is achieved by the use of both hot (wet) and cold (dry) processes for preparing the standard mix firstly under high temperature 168˚C with a continuous mixing for 2 hours then mould this hot mixture in standard molder found with the replacement of a coarse percent of aggregate by the different sizes of scrap tires (1-5)cm by the use of cold ( dry) technique , finally acompression step is achieved with 52 hut for 20 min for both sides of molder in order to compress the prepared specimens then leaved for 24 hrs from the stability of specimens before any tests applied .The results of selected variables are studied for prepared specimens tocheck different important properties (mechanical, physical, chemical, thermomechanical and thermo-physical properties), then applied these result properties data in analytical computer programme software to check its fitting to design model selected and calculated the optimum properties and optimum variables for improved asphalt mix. After-ward the computerize analysis results shows that an optimum mix No.(11) reached high stability and flexibility, also gave excellent physical andchemical properties as shown in present work below. Also described in this work the application and comparison between standard and improved optimum asphalt mix.

Keywords