Recycling (Feb 2020)
Elastomeric Composites Containing SBR Industrial Scraps Devulcanized by Microwaves: Raw Material, Not a Trash
Abstract
Environmental concerns about waste management systems have stimulated the search for technological and economical alternatives that introduce waste as raw material for production cycles. In this sense, this study aimed to develop and characterize styrene-butadiene rubber (SBR) composites that contain industrial rubber scraps devulcanized by microwaves (SBR-r) as a reinforcing filler. The scraps were ground under ambient conditions. From the obtained powder (SBR-r), composites were prepared, varying the exposure time of the powder to the microwaves (1, 2, and 3 min), as well as the SBR-r content. These composites were compared to a Reference sample (base formulation without SBR-r). The vulcanization parameters were determined by an oscillating disk rheometer. After vulcanization, the composites were characterized by mechanical properties (tensile and tear strength, and compression set). These properties were also evaluated after accelerated aging in an air oven and a UV chamber (ultraviolet light). The results indicated that as a result of increasing the exposure time of the waste to the microwaves, no significant influence in the composite properties was observed. Aged samples presented higher results as compared with the Reference sample (tensile strength up to 175% higher, tear strength up to 107% higher, and compression set up to 91% higher), which indicates the possibility of using these materials in technological applications, such as in the civil and automotive industries.
Keywords