Evaluation of Mechanical Properties of Different Casing Drilling Steels

Abstract

An investigation into the mechanical properties of K55, N80, and P110 steels commonly used for casing drilling was carried out together with microstructural and fractographic analysis. The results show that P110 steel consisted of almost fully tempered martensite and exhibited a synergy combination of static tensile, dynamic impact, and fatigue crack propagation properties among the three steels, possessing a higher fatigue limit and deeper crack tolerance before failure occurred. The K55 steel consisted of the pearlite and network structure of ferrite and possessed a high strain hardening exponent and low impact property, which led to the more suitable application under incidental large overload and temperature change, but it was unsuitable under the condition of higher impact force. The properties of N80 steel were moderate, and its fatigue property was higher than that of K55 and lower than that of P110; its incidental overload resistance was also higher than that of P110. The casing drilling steel can be selected according to the environment.

Keywords

• casing drilling steel
• microstructure
• tensile properties
• impact properties
• FCGRs
• fracture surface feature