Catalytic Ozonation for Pulp and Paper Mill Wastewater Treatment: COD Reduction and Organic Matter Degradation Mechanism

Abstract

Rapid degradation of pulping and papermaking wastewater in a pulp and paper mill is crucial for recycling purposes yet challenging to achieve. The purpose of this research is to provide a technical guide for the ozone degradation treatment process of pulp and paper mill wastewater and to explore the reaction mechanism of dissolved and colloidal substances (DCSs). This study is vital for effectively treating pulp and paper mill wastewater through ozonation. In the catalytic ozonation process to treat pulp and paper mill wastewater, a polyurethane sponge loaded with titanium dioxide was used as a catalyst. The optimal process conditions were determined to be 8 min of treatment time, a 16 mg/L ozone concentration, pH 9, and a 7.5% catalyst filling ratio. The COD reduction under these conditions is approximately 52%. The catalytic ozonation system, according to the FI-IR and GC-MS analyses, could degrade the large-molecule volatile organic compounds in the raw wastewater into small-molecule substances. Furthermore, the relative content of common DCSs in paper wastewater, such as palmitic acid and stilbene, could be reduced. The catalytic ozonation system is more effective for treating refractory organic compounds and has a higher COD reduction than the ozonation system.

Keywords

• ozonation
• GC-MS analysis
• FT-IR analysis
• pulp and paper mill wastewater