Effect of Au@MoS2 Contacted PEDOT:PSS on Work Function of Planar Silicon Hybrid Solar Cells

Abstract

Abstract Solar cells formed by spin‐coating organic absorber layers on silicon have attracted widespread attention due to their simple processes and high photovoltaic conversion efficiency (PCE). In typical organic/Si solar cells, however, surface defects or unsatisfactory carrier separation are inadequate to yield excellent device performance. Here, the Au@MoS2 nanocomposites are well synthesized and doped into the organic layer of poly (3,4‐ethylenedioxythiophene)/polystyrene sulfonate (PEDOT:PSS) to improve its work function and the performance of PEDOT:PSS/Si HSCs consequently. By optimizing the doping level of Au@MoS2, the PCE significantly improved from 11.48% to 14.0% by tuning the work function of the PEDOT:PSS layer to more appropriate values. The calculated results based on the Mott–Schottky model indicate that the built‐in field in the PEDOT:PSS/Si interface of HSCs is significantly enhanced due to the increase of work function by the PEDOT:PSS thin films. The enhancement of the built‐in field results in the reduction of the electron–hole recombination loss effectively. The work provides a feasible method for preparing high‐performance PEDOT:PSS/Si HSCs.

Keywords

• Au@MoS2
• hybrid solar cells
• poly(3,4‐ethylenedioxythiophene)
• polystyrene sulfonate
• silicon
• work function